Photoluminescent: Tape Coatings Miscellanous | Tape: Barricade Hazard Non-Slip Pipe Reflective | Floor Stands

Permalight® bumper guards are made of recyclable polyurethane foam. The flexible material absorbs the force of impact and gently bounces back. A protective film coats the surface colour and prevents abrasion resulting from heavy wear and tear. Permalight® bumper guards take the worry out of corners, protrusions and obstacles, so they cannot take you by surprise even in the dark. Photoluminescent warning stripes in accordance with DIN 67510 (German Industrial Standard) and VBG 125 (Accident Prevention Regulation of German Trade Associations) remain visible for many hours after the lights go out. The bright green-yellow glow is generated by zinc-sulfide crystals incorporated into the transparent coating material. This material is non-toxic and free of radioactive additives.The installation of Permalight® bumper guards is a matter of minutes. Simply remove the protective strip on the inside surface to expose the adhesive film, then attach the bumper guard to a clean, grease free surface. The result of the adhesive strength will convince you.

Permalight® bumper guards are available in three different styles.
Type A, B, and C.
This provides a wide range of individual application possibilities.

All three types conform to DIN 67510 and VBG 125, are flame-retardant and may be disposed with household garbage, when required. Photoluminescent bumper guards in accordance with DIN 67510 and VBG 125
COLOR Black/yellow - red/photoluminescent - black
other colors available with minimum order quantities of 500 meters
LENGTH 1,000 MM standard length, other sizes available upon request
MATERIAL Material recyclable and flame-retardant polyurethane foam

HANDRAIL
Permalight® introduces a new generation of handrails (in accordance with VBG 125), featuring a high-quality polyurethane foam base and black-yellow striped surface.

Unlike conventional PVC handrails that require heating prior to application, this new Permalight® handrail can quickly and easily be attached to flat iron (40 X 8 mm). An adhesive coating on the inside of handrail surface, covered with a protective strip, allows a convenient application on straight or curved railings. Permalight® handrails are suitable for interior and exterior balustrades and stairwells. A special surface coating prevents penetration of moisture.

PLEASE CALL FOR AVAILABILTY AND PRICING

TECHNICAL DATA